The filling principle uses the constant pressure PET bottle Mold negative pressure fixed flow channel parameter to control the filling (volume, ) to achieve different measurement. The filling structure is simple and the adjustment is convenient. The size of the bottle is universal, and there is no need to replac the accessories to change the bottle shape, just adjust it. Linear Filling Machine This machine is a quantitative automatic filling machine, which can be used in the filling operation of paste and thin viscous body. In design, it adopts a mechanical-based linear motion method, and uses PLC logic controller and various detection and induction devices and cylinders. The machine can be retracted and placed automatically to achieve the purpose of automatic control. The equipment material uses 304 stainless steel and aluminum alloy frame, which fully conforms to the GMP standard.
The equipment is easy to operate, and can be filled with different containers in a short time to achieve the cost-effectiveness of one machine. 1. Using PLC programmable control 2. Equipped with a 5.7-inch color touch screen man-machine interface system 3., Filling Volume adjustment, filling speed, the entire equipment system can be completed with a single touch on the man-machine interface, which is convenient and direct 5. The filling structure is simple, the adjustment is convenient, the size of the bottle is universal, and there is no need to replac the accessories to change the bottle shape, just adjust. 6. It can run through the whole assembly line. Working principle, the metering cylinders of the filling machine are respectively connected to the filling heads,plastic bottle making machine and through the reciprocating motion of the main oil cylinder, a certain amount of liquid, semi-fluid and paste is sucked, and then injected into the container to be filled. In this process, it is necessary to switch a through valve to change the flow direction of the liquid when the main material cylinder is reversed in time.
Moreover, during the injection process. In order to speed up the filling speed without causing the liquid to overflow, when 90% of the full bottle is filled, a throttle valve connected in series to the injection passage should be opened, so that the injected flow rate is significantly reduced. Then, the filled containers will be removed in sequence, and new empty containers will be moved in sequence. During this process, the blocking plates installed at the inlet and outlet of the containers are accurately and timely controlled to ensure that only the containers are moved in and out each time. At the same time, it is necessary to ensure that no matter what shape of container is used, the filling head can exactly match the bottle mouth of the container, otherwise an alarm signal will be output, and the filling will not continue until the fault is eliminated. For materials that are easy to foam, the equipment is filled and lifted to reduce foaming.
Finally, after the container is in place, PET blow moulding machine the filling head can move down accurately so that the filling can be inserted into the bottle mouth. After filling, the filling head should move up quickly so that the container can be output smoothly.
PLC programmable control, equipped with 6-inch touch screen man-machine interface system, implements automatic bottle feeding, automatic filling, automatic bottle output, no bottle filling, accurate filling amount and counting function. Electrical appliances and electric components are all branded to ensure excellent quality and long-lasting stable performance. This machine is equipped with a filling head to prevent dripping and wire drawing to ensure that there is no dripping after filling. It is equipped with a submersible filling system to ensure that there is no foam during the filling process and to prevent the overflow of the filling material. The filling mechanism is covered with plexiglass, which is beautiful and dustproof. This machine is widely used for liquid filling in food, medicine, chemical, daily chemical, oil, fishery, pesticide and other industries. The parts in contact with the material are made of high-quality stainless steel, in line with GMP standards.
Our News
